Click here to order BSD Customs

Custom Bodyboard Price $350.00  Plus Shipping

REQUEST ORDER FORM
Contact BSD by email or phone to receive the Custom Board Order Form.
 PAYMENT
Ben will provide the details to  process your order.
CONFIRMATION
Ben will email you to confirm your order and help with any design questions.

Measurements Tips
NOSE: MEASURE FROM THE EDGE TO EDGE INCLUDING THE RAIL SKIN
WIDE POINT: MEASURE THE BOARDS WIDEST POINT INCLUDING RAIL SKINS.
*THE BEST WAY IS TO PUT THE BOARD FLAT ON THE FLOOR WITH ONE RAIL AGAINST THE
WALL, MEASURE FROM THE WALL TO THE OUT SIDE OF THE OPPOSITE RAIL.

NOSE TO WIDE POINT:
AFTER DETERMINING THE WIDE POINT, MEASURE FROM THE NOSE TO THE WIDE POINT,
ALL BOARDS HAVE A WIDE POINT THE EXTENDS A FEW INCHES,
SO MAKE THE MEASUREMENT TO THE BEGINNING OF THE WIDE POINT.

TAIL: 
MEASURE TAIL FROM THE POINT WERE THE TOP AND BOTTOM RAILS MEET TO THE
OPPOSITE SIDE.

THICKNESS:
 PUT THE BOARD ON A FLAT TABLE WITH THE DECK FACING UP,
THEN PLACE A BOOK OR OTHER LONG FLAT OBJECT ON THE DECK AND MEASURE FROM THE TABLE TO THE EDGE OF THE BOOK. 
 
Rail Designs
Transitional Rails:   This rail configuration  allows the rail of the board to gentle slice into the face of the wave rather than shearing off water inhibiting the speed of the board plus throwing water in your face like existing rail designs. The rounded transition from nose to 50/50 rail half way down the board allows a clean edge to be maintained for super wave holding ability and turning response. Having this rounded rail system also allows the rider to turn more efficiently on critical sections of the wave, especially on steep take off and vertical  ascents. The rail will not bite on the upper area of the board like conventional rails, which do and cause the rider to nose dive or dramatically lose speed when landing or during other critical maneuvers.

Tails Designs
BATAIL GIVES YOU GOOD HOLDING POWER AND PROJECTION.  THE POINTS OF THE BATAIL ALLOW THE RAIL TO SIT IN THE WAVE FACE FOR CONTROL. THE ROUND AREA OF THE TAIL INCREASES MANEUVERABILITY AND SPEED. THIS TAIL DESIGN IS IDEAL FOR PRONE RIDING IN ALL WAVE CONDITIONS. 

CRESCENT TAIL GIVES YOU THE MOST CONTROL OF ALL TAIL DESIGNS. THIS TAIL IS IDEAL FOR BEGINNERS, POWERFUL WAVES AND DROP KNEE RIDING. 

ROUNDED SQUARE TAIL IS VERY MANEUVERABLE GIVING YOU THE ABILITY TO DO QUICK MANEUVERS.  THIS BOARD IS IDEAL FOR ROLLOS, ARS’S AND SPINNERS.  THIS TAIL DESIGN IS FOR PRONE RIDING IN SMALL TO MEDIUM SIZE WAVES.

Stringers
STRINGER HELP KEEP YOUR BOARD STIFF OVER IT LIFE TIME

MESH
ADS STIFFNES BUT WITH A BIT MORE FLEX THU OUT HE BOARD

HAND BULBS
AID IN HOLDING ON THE NOSE 

CHANNELS
 CHANNELS ARE DESIGNED TO GIVE  MORE CONTROL IN THE STEEPEST MOST POWERFUL PART OF THE WAVE,  ALLOWING HARDER TURNS IN THE POWER POCKET AND GREATER BURSTS OF SPEED OUT OF THESE ZONES.  ALL BSD CHANNELS ARE DESIGNED WITH A SMOOTH AND EVEN FADE FROM THE BEGINNING OF THE CHANNEL TO IT'S DEEPEST POINT.  THIS HYDRODYNAMIC OR "SMOOTH WATER ENTRY" DESIGN REDUCES TURBULENCE, RESULTING IN MORE OVERALL SPEED, CONTROL, AND ACCELERATION.  
FLAT BOTTOM
 GOOD FOR SMALL WAVES AND DROP KNEE.